After a successful 2011, we are starting the new year 2012 with a new product launch and are proud to present the revolution in sound reinforcement technology - our new DS-6 PA-Control. It combines All important functions for controlling and monitoring a sound system. Instead of several different sound components, only a single controller is required.
He takes over the Connecting the amplifiers (one per channel) to the DS-6 network using a redundant DS-6 interface for each controller and forwards all error messages via this interface. This means that the analogue DS-6 plug-in unit is no longer required.
With the DS-6 PA-Control, a total of 4 speaker circuits switchable per amplifierso that it replaces the LK connection plug-in unit.
At the same time, the DS-6 PA Control ensures Amplifier failure monitoring also during sound reinforcement and for automatic switching to a redundant amplifier (Average switching), so that the monitoring/haviour insert is no longer necessary.
It also monitors the amplifier for Overloade.g. by retrofitting additional speakers, short-circuiting or increasing the power of individual speakers.
These functions are included as standard in the scope of delivery of the DS-6 PA Control. Other functions are also realised via additional software components.
The Impedance monitoring and earth fault detection can be integrated into the new DS-6 PA Control as a software component. This means that the Lineguard is no longer required.
Another software component for the DS-6 PA-Control is the Environment-dependent volume controlso that this additional card is no longer necessary.
With ring-shaped cabling, the Cable loops of two loudspeaker circuits monitored and fed in on both sides in the event of a line interruption can be used. This also eliminates the need for the DS-6 switchover plug-in unit for loudspeaker cables.
By bundling the most important sound reinforcement functions in one device, the new DS-6 PA-Control Many advantages with it. One major advantage is the Low wiring effort. The existing sound reinforcement concept requires a great deal of wiring due to the large number of individual components and their connection technology (wire wrap).
New version of the configuration programme DS-6 Config
The new version of our configuration programme DS-6 Config (version 1.0.98) is now available. This makes the configuration of our DS-6 systems even easier.
The new programme is characterised above all by a Easier handling and through the Optimisation of data management off. For example, the device names specified by the customer are automatically changed in all places when changes are made.
Another advantage is the Display of the history. So all Changes to the system and can be tracked later.
The new configuration programme also takes account of the company's international orientation. The Menu navigation Can be adjusted in German, English, Russian and French.
In addition, the new DS-6 Config Many new functions with it. So now our DS-6 telephone serverwhich DS-6 PC intercom and the I/O module directly with the help of the new programme configured become.
Another new feature is the Online help systemthat automatically calls up the corresponding help page for the page that is currently open.
Also new is the Automatic creation of the speech connection plan as HTML or Excel file (if Excel is installed).
The new DS-6 Config also offers the option of Automatically generate button labelling according to the entered call destination. These can then be easily printed out, which saves a lot of work.