A world of new possibilities is created by the Connection of the IP-based intercom systems from Neumann Elektronik and Schneider Intercom. This allows the customer to Advantages of both systems in a joint system utilise.
In co-operation with Schneider Intercom, we have succeeded in developing a IP connection between the two systems TIMM from ms Neumann Elektronik and Intercom 2.0 from Schneider Intercom via the General IP network produce.
Many New communication options are created by this IP connection between the two systems. And the whole thing via a common network.
This is how Intercom connections between intercom stations from Neumann Elektronik (e.g. digital desktop intercom stations, weatherproof intercom stations, Ex intercom stations, etc.) and intercom stations from Schneider Intercom (e.g. cleanroom intercom stations, intercom stations with TFT or LC display as well as with video camera, vandal-proof intercom stations, etc.).
In the area Sound system connections between Schneider Intercom intercom stations and Neumann Elektronik PA components can now also be realised. For example, sound reinforcement in the industrial sector can be carried out via our sound reinforcement system from a Schneider Intercom intercom station.
Also in the area of Telephony result New communication channels. Connections between Schneider Intercom intercom stations and telephone subscribers in the TIMM system are also possible thanks to the new IP connection.
In addition, you can Control functions any of both systems (e.g. activation of contacts, flashing lights, etc.).
Between the two systems there are also Transmit fault messagesto display them in one system or the other or to trigger corresponding actions. For example, a fault message from Schneider Intercom is saved in the TIMM system as an entry in the SNMP MIB.
Highest security level: Redundant connection of digital outdoor intercom stations
To also Highest safety requirements to fulfil the DS-6 Digital outdoor intercom stations (WFD) from Neumann Elektronik as well redundant via two separate systems be connected. If one system fails, the other takes over all functions. And even in explosion-protected areas.
The entire system is Redundant design (system A and system B). In both systems, one UK0-adapter for connecting the digital external call station and a DS-6 control unit for monitoring and control.
The digital external call station is connected via a DS-6 connection redundant to both UK0-adapter connected. In the main system (system A), the intercom station is also connected to the DS-6 control unit via a 2-wire line. This connection is omitted in the redundant system (system B). However, a 6-wire line should still be used on both sides. The MTSD DS-6 digital indoor call station is also connected redundantly to both systems here.
The two DS-6 control units monitor both systems. If system A fails, the DS-6 control unit switches from system A to B in this network. In system B, the DS-6 control unit for the connection of the UK0 adapter. This is switched off during fault-free operation. If system A fails, the UK0 adapter in system B is switched on via the DS-6 control unit and takes over the functions from system A.
