Your partner for

Intercom PAGA SOS

burger

DS-6 Up0-Adapter

8 Ports for WFD Up0  

The DS-6 Up0-Adapter serves as an adapter or interface for the connection of digital Up0 stations to the decentralised communication system DS-6.

A total of eight digital stations can be connected with cable lengths of up to 2 km without additional power supply.

Two redundant 4-way switches are integrated in the DS-6 Up0-Adapter to connect the eight Up0 subscribers to the DS-6 network. The UKp0-Adapter as a single device forms a small network node for eight digital Up0 subscribers.

In addition, each switch has four Ethernet ports for redundant network construction and redundant cascading of the devices.

IP-adapter for digital call stations

Serverless operation even with cascaded setup (with up to 6 Up0 adapters)

Up to 8 digital call stations without additional power supplywith cable lengths of up to 2 km using 2-wire technology

Two redundant switches to connect the 8 Up0 subscribers

Four Ethernet ports for redundant network configuration and redundant cascading of devices

Can be operated in DS-6 network and TIMM

Fuse monitoring

Temperature monitoring

Watchdog

2 fault signal change-over contacts

Operating mode can be configured separately for each component port

Front panel contains 8x RJ45 LAN sockets, 2x USB service sockets and 16x Up0 status LEDs and 8x device status LEDs

Rear panel contains 8x RJ45 Up0 sockets, 2 fault indication contacts, 9 fuses and the terminals for the power supply

DS-6 Up0-Adapter

3 338 7

Technical data and product information may vary or be changed without prior notice.