Due to public holidays in Germany, our office will be closed from 29.03.2024 to 01.04.2024.

Your partner for

Intercom PAGA SOS

burger

DS-22 WFDR IP

Weatherproof digital retro call station (100mm width) 

The DS-22 WFD IP 3 line weatherproof digital call station is used in intercom systems in the DS-22 decentralised communication system. It enables direct voice connections with other call stations and loudspeaker announcements outdoors and in rooms with harsh or noisy environments, e.g. in heavy industry operations or railway engineering areas.

With its integrated DR-Intercom and crossing barrier station functions, the DS-22 WFD IP weatherproof digital call station is ideally suited for use in railway applications. These functions facilitate communication between railway operators and enable communication between road users and railway operators of manually controlled level crossings.


The DS-22 WFDR IP 3 line weatherproof digital call stations described here have one to three single toggle buttons for up to three lines and are available in the housing colours pure orange RAL 2004 and golden yellow RAL 1004.

The call stations of this retro-design are primarily used to replace existing call stations of other technologies, taking into account the previous mounting positions, e.g. in recesses.

With a connected WFDR 3 line Add-on housing, it is possible to expand the DS-22 WFDR IP 3 line weatherproof digital call station by an additional 3 single toggle buttons with three additional lines, per connected WFDR Add-on housing.

Up to four WFDR 3 line Add-on housings can be connected to a DS-22 WFDR IP 3 line weatherproof digital call station. This makes it possible to equip a DS-22 WFDR IP 3 line weatherproof digital call station in full configuration with a maximum of 18 buttons.


The DS-22 WFDR IP 3 line weatherproof digital call station is connected to the DS-22 network via standard network cables. The standard power supply of the DS-22 WFDR IP 3 line weatherproof digital call station is PoE, a DC 48V power supply from the network node is optionally possible.


The DS-22 WFDR IP 3 line weatherproof digital call station is connected to the DS-22 network via standard network cables. The standard power supply of the DS-22 WFDR IP 3 line weatherproof digital call station is PoE, a DC 48V power supply from the network node is optionally possible.

Call stations that do not have an integrated 30W Class-D additional amplifier are prepared for built- in and connection of a 30W Class-D additional amplifier. However, the type of connection must be taken into account. Both additional amplifiers can operate a local loudspeaker circuit (LC).

Full compatibility with DS-22 system / SPI-22 platform

Remotely configurable and remotely monitorable Configuration via WEB interface

Dual use - Native SIP protocol / terminal or WL/EL Neumann protocol selectable

Half / full duplex compatibility

Software PLC

Direct voice connections via key-controlled line selection

High speech intelligibility (up to 22kHz bandwidth - depending on codec selection)

Low and high volume control (12dB level reduction)

Integrated voice memory

Free key assignment as WL target keys or for local functions

Integrated Class-D 7W amplifier for horn loudspeakers for best speech intelligibility with wide frequency range

Integrated Class-D 7W amplifier for on/off mode or monitoring loudspeaker in standard technology with 8Ω loudspeakers

One Ethernet interface and one service interface

Line keys can be freely assigned with destinations

Indication of status messages, such as call and busy signals, by means of light-ewithting diodes

Cyclic acoustic test for microphone and loudspeaker monitoring

Fault management via IoT MQTT interface

Adjustable and monitored electret microphone with electronic noise compensation and dynamic compression

Microphone / loudspeaker monitoring

Dust- and water-resistant glass-fibre reinforced polyester housing

Pressure chamber loudspeaker

Built-in electret microphone

Up to three freely inscribable single toggle speech buttons with opto-couplers, each for one line

Up to three freely inscribable single toggle speech buttons with opto-couplers, each for one line

Switchable volume reduction e.g. for night operation

Optional expandability with headset, foot switch or microphone

Integrated connection for monitoring or announcement loudspeaker

Dialling function with or without keypad

EL mode with own additional loudspeaker as standard; volume configurable

Potential-free relay contact for connection of a flashing light for visual signalling or a signal horn for acoustic signalling

PoE phantom or PoE spare pairs power supply

Optional mains node power supply or weatherproof local power supply DC 48V available

DR-Intercom and crossing barrier station as integrated special functions for railway applications

Disconnection of the auxiliary loudspeaker after the first WL response as a standard feature

With and without integrated 30W Class-D auxiliary amplifier in 100V technology

Loudspeaker impedance monitoring of the 30W Class-D auxiliary amplifier

Optional impedance measurement at the 100V connection of the 30W Class-D amplifier

Temperature-controlled power limitation of the 30W Class-D auxiliary amplifier

Internal 100V speaker volume setting

Optional range extenders available

Internal microphone level and loudspeaker volume adjustment

Connections and cable glands for additional components, e.g. loudspeaker and controlled powered flashing beacon for visual signalling or controlled powered horn for audible signalling, as standard

Mounting of the call station after lifting off the housing cover through four mounting holes in the basic housing

DS-22 WFDR IP

1 8XX X

Technical data and product information may vary or be changed without prior notice.